ML-200 Marker Light Series
The Daniamant ML-200 marker light series has high intensity LEDs and is powered by a special high capacity battery pack at 4.5 VDC
The Daniamant ML-200 standard series consist of:
- Daniamant ML-200 yellow LED 25 flash at 5 candela marking light.
- Daniamant ML-200 white LED 25 flash at 5 candela marking light.
- Daniamant ML-200 fixed red LED 5 candela marking light.
- Daniamant ML-200 Synch Master.
The following marker light features can be changed by programming:
- Light-intensity
- Flash-rate
- Synchronization as master/slave
- Daylight switch (with adjustable ambient light level for ON/OFF)
The Daniamant ML-200 series is developed for marking of e.g. nets and long line fishing equipment, buoys, seismic cables, anchor chains and moorings, fish farms, oil cables and offshore installations. The ML-series has a module-based construction, which makes these marking lights user-friendly during any service and repair.
When is a Daniamant ML-200 Synch Master needed?
If one ML-light is programmed as “Master” and the other lights are programmed as “Slaves” and the distance between “Master” and “Slaves” are less than 90-100 meters, synchronization should function OK. All lights in the ML-series (ML-100, ML-200 and ML-300) can be programmed as either “Master” or “Slave”.
If the distance between “Master” and “Slaves” is between 100-450 meters, a dedicated Synch-Master must be used. This device can be powered at 4.5 VDC or 10-27 VDC battery and fit to the houses used for ML-100, ML-200 and ML-300.
- High Intensity LED
- special high capacity battery pack
- Red, White or Yellow Light
Material housing | Aluminium |
Material lens | LEXAN |
Light system | LED (white, yellow or red) |
Light intensity (Red LED 5-Cd only) | 5- or 15-Cd (Candela) |
Surface range | 2 or 3 NM (nautical miles) |
Waterproof | Down to 100 meters |
Activation switch | On/Off by daylight-sensor only |
Flash-rate | 25 flash/min or Oc Y 2s |
Software programming | Flash rate, intensity, sync, daylight switch |
Power/battery-type | 4.5 VDC special battery-pack |
Lens colour | White |
LED colour standard | White or yellow |
LED colour option | Red |
Dimensions approx. | Length: 1615 mm / Ø: 70/50 mm |
Fixing option | Various floaters |
Major Benefits
- High Intensity LED
- special high capacity battery pack
- Red, White or Yellow Light
Specs
Material housing | Aluminium |
Material lens | LEXAN |
Light system | LED (white, yellow or red) |
Light intensity (Red LED 5-Cd only) | 5- or 15-Cd (Candela) |
Surface range | 2 or 3 NM (nautical miles) |
Waterproof | Down to 100 meters |
Activation switch | On/Off by daylight-sensor only |
Flash-rate | 25 flash/min or Oc Y 2s |
Software programming | Flash rate, intensity, sync, daylight switch |
Power/battery-type | 4.5 VDC special battery-pack |
Lens colour | White |
LED colour standard | White or yellow |
LED colour option | Red |
Dimensions approx. | Length: 1615 mm / Ø: 70/50 mm |
Fixing option | Various floaters |
- Daniamant A/S
- Industrivej 24C, DK-3550 Slangerup
- Tel: +45 4737 3800
- Fax +45 4737 3809
- VAT No.: DK 1693 0997
- Email: info@daniamant.com