Rescue Master Series

External Light type Rescue-Master Lite GB. A manually activated External Position Indicating Light for Liferafts. The mounting method varies according to the style of Liferaft involved. The light is activated by removing the activation pin. The light can also be turned off by reinserting the same pin, or the spare pin attached to the battery. External light type Rescue-Master 2B: The light has two parts, a battery and lamp, which can be supplied separately. The lead length on the lamp is custom made. The light flashes to reduce battery power and heat from the lamp. The lamp exceeds light intensity requirements of 4.3cd for 12 hours. The battery is automatically activated when the activation pin is pulled out of the battery during inflation of a life raft. Class9Classified as Hazardous for Shipping Purposes – See PSDS below External light type Rescue-Master 3B: The light is identical to Rescue-Master 2B, but has a larger battery housing. Class9Classified as Hazardous for Shipping Purposes – See PSDS below Internal light type Rescue-Master 1: The light has two parts, a battery and lamp, which can be supplied separately. The lead length on the lamp is custom made. The light is steady and sufficient for at least 12 hours with a minimum light output of 0.5cd in all directions. The battery can be automatically activated by pulling the activation pin out of the battery during inflation of the life raft Class9Classified as Hazardous for Shipping Purposes – See PSDS below External light type Rescue-Master 12V This light is intended for motorised survival craft and to be connected to the crafts 12V electrical system.  The lamp is polarized, so when connected correctly, the lamp will flash.  Incorrect connection will result in a steady light.  The bulb can be replaced by unscrewing the four cap screws.  Only original Daniamant parts can be used to replace the bulb and this should be replaced after 12 hours of use.